For the Camera Stabilization and Support, Alexmos Controller has been used to build 3 axis high quality system. It is specifically used to build Handheld Stabilizers of Camera by mounting it to UAV. It is one of the best options of Next Generation Alexmos Controller with the support of high voltage up to 30 volts (6s). Its use is very suitable for large brushless gimbal motors and Large gimbals of 80 mm.
 |
| Aerial Cinematophraphy |
The innovation and development of the new version of the controller has replaced the use of previous version of 8 bit in SimpleBGC controller. Its functioning is very supportive and completely compatible for use.There are 3 additional reserved input/output AUX1-AUX3 units that has increased the number of inputs to control the signals. For the External devices with 5 volt power, it can supply up to one ampere current. Window/Linux web versions can manage the settings with graphical user interface. Various types of protocols like PWM, Spektrum, Sum-PPM and s-bus can be effectively supported with the latest new version of the controller. With the analog joystick or RC, The controller allows the control on the camera. The extra benefit of its use is that there is a low battery alarm with the output to 5V active buzzer.
The actual purpose of an alexmos simple BGC controller is to handle the disturbance with immediate response, low weight and easy installation process. It protects. Dedicated API is used to control through serial protocol. The protective measure is very effective with the reversion action for polarity, overcurrent and overheat. The battery voltage is properly monitored with compensation of voltage drop by PID- Regulator.
For 3 axis camera stabilization system, the Alexmos Controller works well with the addition of extension board. With the 32 bit board, you will really find the upgradation with its use. For the connection with the optional Bluetooth module, it will positively support with the UART – socket system. For the different modes of operation, use several switchable profiles. With the optional second IMU, it precisely increase the short term stabilization and the stable work in any of the frame positions.
The actual purpose of an alexmos simple BGC controller is to handle the disturbance with immediate response, low weight and easy installation process. It protects. Dedicated API is used to control through serial protocol. The protective measure is very effective with the reversion action for polarity, overcurrent and overheat. The battery voltage is properly monitored with compensation of voltage drop by PID- Regulator.
For 3 axis camera stabilization system, the Alexmos Controller works well with the addition of extension board. With the 32 bit board, you will really find the upgradation with its use. For the connection with the optional Bluetooth module, it will positively support with the UART – socket system. For the different modes of operation, use several switchable profiles. With the optional second IMU, it precisely increase the short term stabilization and the stable work in any of the frame positions.
No comments:
Post a Comment